
|
SANE: Supported Devices
The following table summarizes the devices supported by sane-backends-1.0.14.
This is only a summary!
Please consult the manpages and the author-supplied webpages
for more detailed (and usually important) information
concerning each backend.
If you have new information or corrections, please file a
bug report
with as many details as possible. Also please tell us if your scanner
isn't mentioned in this list at all.
For an explanation of the tables, see the
legend.
There are tables for scanners,
still cameras,
video cameras,
APIs, and
meta backends.
Manufacturers:
Abaton,
Acer Peripherals,
Across Technologies,
Actown,
Adlib,
AGFA,
Apple,
Aries,
Artec/Ultima,
Avigramm,
Avision,
Bell and Howell,
Benq,
BlackWidow,
Boeder,
BrightScan,
Brother,
Canon,
Compaq,
Corex,
Cybercom,
Devcom,
Dextra,
E-Lux,
EDGE,
Enhans,
Epson,
Escom,
Escort,
Fujitsu,
Gallery,
Genius,
Googlegear,
Guillemot,
Guillemot / Hercules,
Hercules,
Hewlett-Packard,
IBM,
Komodo,
LEO,
Lexmark,
Linotype Hell,
Logitec,
Medion/Lifetec/Tevion/Cytron,
Memorex,
Microstar,
Microtek,
Minolta,
Mitsubishi,
Mustek,
NEC,
Nikon,
Optrox,
Packard Bell,
Panasonic,
Pentax,
PIE,
PIOTECH,
Plustek,
Primax,
Prolink,
Quato,
Reflecta,
Relisys,
RevScan,
Ricoh,
Scanport,
Sceptre,
Sharp,
Sicos,
Siemens,
Spot Technology,
Syscan,
Tamarack,
Targa,
TCE,
Teco,
TriGem,
Trust,
UMAX,
Vantas,
Visioneer,
Viviscan,
Vobis,
Vuego,
Xerox
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Scan 300/GS |
SCSI |
complete |
All known modes and functions supported |
abaton (unmaintained)
|
sane-abaton |
Scan 300/S |
SCSI |
untested |
Untested, use with caution |
abaton (unmaintained)
|
sane-abaton |
Comment: Company was renamed to Benq.
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
FS-1130 |
SCSI |
good |
FCC ID LUZFS1130 |
leo
(1.0-10)
|
sane-leo |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
ACT Scan I 30 |
SCSI |
untested |
sub model VM3520A |
teco1
(1.0-10)
|
sane-teco1 |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
JetScan630 |
SCSI |
good |
|
pie
(1.0)
|
sane-pie |
JetScan636PRO |
SCSI |
untested |
|
pie
(1.0)
|
sane-pie |
Link(s):
http://www.agfa.com/
Link(s):
http://developer.apple.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Apple Scanner |
SCSI |
good |
4bit, 16 shades of gray |
apple (unmaintained)
|
sane-apple |
ColorOneScanner |
SCSI |
minimal |
truecolor (needs much work) but it scans in non color modes. |
apple (unmaintained)
|
sane-apple |
OneScanner |
SCSI |
basic |
8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work. |
apple (unmaintained)
|
sane-apple |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Scan-It Pro 4800 |
Parport (SPP, EPP) |
complete |
use driver-switch mov=2 |
plustek_pp
(0.01)
|
sane-plustek_pp |
Link(s):
http://www.artecusa.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
1236 USB |
USB |
unsupported |
Unsupported. Vendor/product 0x05d8/0x4001. See link for details. |
unsupported
(2004-04-30)
|
? |
A6000C |
SCSI |
complete |
all modes working |
artec
(unmaintained)
|
sane-artec |
A6000C PLUS |
SCSI |
complete |
f/w <= v1.92 basic, f/w >= v1.93 OK |
artec
(unmaintained)
|
sane-artec |
AM12e+ |
Parport |
unsupported |
Unsupported. Chipset unknown. Maybe similar to SCSI version or as6e? |
unsupported
(2004-04-30)
|
? |
AM12S |
SCSI |
complete |
all modes working |
artec
(unmaintained)
|
sane-artec |
AS6E |
Parport |
basic |
Requires the program 'as6edriver' to run. |
as6e
(0.4.2)
|
sane-as6e |
AT3 |
SCSI |
complete |
all modes working |
artec
(unmaintained)
|
sane-artec |
AT6 |
SCSI |
minimal |
First scan works, subsequent fail until scanner power cycle. |
artec
(unmaintained)
|
sane-artec |
AT12 |
SCSI |
complete |
all modes working |
artec
(unmaintained)
|
sane-artec |
E+ 48U |
USB |
good |
CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners. |
artec_eplus48u
(0.0.10)
|
sane-artec_eplus48u |
E+ Pro |
USB |
minimal |
Experimental! Different product id: 0x4004. Please report your results! |
artec_eplus48u
(0.0.10)
|
sane-artec_eplus48u |
Ultima 2000 |
USB |
good |
Works, only product id 0x4002 is supported |
gt68xx
(1.0-60)
|
sane-gt68xx |
Ultima 2000 (0x4001) |
USB |
unsupported |
Same name, but different ids: vendor/product 0x05d8/0x4001 is not supported. The scanner with product id 0x4002 is supported by the gt68xx backend. |
unsupported
(2004-04-30)
|
? |
Ultima 2000 e+ |
USB |
good |
Works, only limited testing until now |
gt68xx
(1.0-60)
|
sane-gt68xx |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Minidoc |
USB |
unsupported |
Not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.avision.com, http://www.avision.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
AV100CS |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV100IIICS |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV100S |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV210 |
USB |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV220 |
USB |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV240SC |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV260CS |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV360CS |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV363CS |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV420CS |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV600U |
USB |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV600U Plus |
USB |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV610CU Scancopier |
USB |
untested |
1 pass, 600 dpi |
avision
(Build: 80)
|
sane-avision |
AV620CS |
SCSI |
complete |
1 pass, 600 dpi |
avision
(Build: 80)
|
sane-avision |
AV620CS Plus |
SCSI |
complete |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV630CS |
SCSI |
complete |
1 pass, 1200 dpi - regularly tested |
avision
(Build: 80)
|
sane-avision |
AV630CSL |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV660S |
USB |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV680S |
USB |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV690U |
USB |
untested |
1 pass, 2400 dpi |
avision
(Build: 80)
|
sane-avision |
AV800S |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV810C |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV820 |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV820C |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV820C Plus |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV830C |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV830C Plus |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV880 |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV880C |
SCSI |
untested |
1 pass, 1200 dpi |
avision
(Build: 80)
|
sane-avision |
AV6120 |
SCSI |
untested |
|
avision
(Build: 80)
|
sane-avision |
AV6240 |
SCSI |
complete |
1 pass, ??? dpi |
avision
(Build: 80)
|
sane-avision |
AV8000S |
SCSI |
complete |
1 pass, 1200 dpi, A3 - regularly tested |
avision
(Build: 80)
|
sane-avision |
AVA3 |
SCSI |
untested |
1 pass, 600 dpi, A3 |
avision
(Build: 80)
|
sane-avision |
iVina FB2400 |
USB |
unsupported |
Not supported. No chipset information available. Same as UMAX Astra 6700. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.bhscanners.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
COPISCAN II 2135 |
SCSI |
untested |
Simplex Scanner |
bh
(1.0-4)
|
sane-bh |
COPISCAN II 2137(A) |
SCSI |
good |
Simplex Scanner (with ACE) - limited testing |
bh
(1.0-4)
|
sane-bh |
COPISCAN II 2138A |
SCSI |
untested |
Simplex Scanner with ACE |
bh
(1.0-4)
|
sane-bh |
COPISCAN II 3238 |
SCSI |
untested |
Simplex Scanner |
bh
(1.0-4)
|
sane-bh |
COPISCAN II 3338(A) |
SCSI |
untested |
Simplex Scanner (with ACE) |
bh
(1.0-4)
|
sane-bh |
COPISCAN II 6338 |
SCSI |
good |
Duplex Scanner with ACE - development model |
bh
(1.0-4)
|
sane-bh |
Link(s):
http://www.benq.com
Comment: Formerly Acer Peripherals
Link(s):
http://www.blackwidow.co.uk/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
BW4800SP |
SCSI |
complete |
rebadged Artec AT3 |
artec
(unmaintained)
|
sane-artec |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Sm@rtScan Office |
Parport USB |
unsupported |
Unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
Sm@rtScan Slim Edition |
USB |
good |
Similar to Artec Ultima 2000 |
gt68xx
(1.0-60)
|
sane-gt68xx |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
BrighScan OpticPro |
Parport (SPP, EPP) |
complete |
Reported as P12 |
plustek_pp
(0.01)
|
sane-plustek_pp |
Link(s):
http://www.brother.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
DCP 8020 |
USB |
unsupported |
Unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
MFC 4600 |
Parport USB |
unsupported |
Unsupported. However there is a project to support this scanner/printer/fax combination. See link. |
unsupported
(2004-04-30)
|
? |
MFC 5100c |
Parport USB |
unsupported |
Unsupported. Some information is available (see link). See also MFC 4600. |
unsupported
(2004-04-30)
|
? |
MFC 6800 |
USB |
unsupported |
Unsupported. A backend is under development (see link). Vendor/product 0x04f9/0x0111. See also MFC 4600. |
unsupported
(2004-04-30)
|
? |
MFC 9160 |
USB Parport |
unsupported |
Unsupported. Maybe it's similar to the other Brother MFCs? |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.canon.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
CanoScan 300 |
SCSI |
good |
1 pass; flatbed scanner |
canon
(1.12)
|
sane-canon |
CanoScan 600 |
SCSI |
good |
|
canon
(1.12)
|
sane-canon |
CanoScan 620S |
SCSI |
good |
1 pass; flatbed scanner |
canon
(1.12)
|
sane-canon |
CanoScan 1200S |
SCSI |
good |
1 pass; flatbed scanner |
canon
(1.12)
|
sane-canon |
CanoScan 2700F |
SCSI |
good |
1 pass; film scanner |
canon
(1.12)
|
sane-canon |
CanoScan 2710S |
SCSI |
good |
1 pass; 36bit film scanner |
canon
(1.12)
|
sane-canon |
CanoScan 3000 |
USB |
unsupported |
Probably unsupported. See link. |
unsupported
(2004-04-30)
|
? |
CanoScan 3000F |
USB |
unsupported |
Probably unsupported. See link. |
unsupported
(2004-04-30)
|
? |
CanoScan 3200F |
USB |
unsupported |
Probably unsupported. See link. |
unsupported
(2004-04-30)
|
? |
CanoScan 5000F |
USB |
unsupported |
Probably unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
CanoScan 8000F |
USB |
unsupported |
Not supported. USB Vendor/product 0x04a9/0x220f. See link for more information. With transparency adapter. |
unsupported
(2004-04-30)
|
? |
CanoScan 9900F |
USB |
unsupported |
Probably unsupported, similar to 8000F. Vendor/product 0x04a9/0x2210. 3200x6400 dpi USB2. With transparency adapter. |
unsupported
(2004-04-30)
|
? |
CanoScan D646U |
USB |
unsupported |
Probably not supported. USB Vendor/product 0x04a9/0x220b. See link for more information and test program. |
unsupported
(2004-04-30)
|
? |
CanoScan D646U ex |
USB |
unsupported |
Probably not supported. No further details known. |
unsupported
(2004-04-30)
|
? |
CanoScan D660U |
USB |
basic |
Binary and gray mode not working |
plustek
(0.47)
|
sane-plustek |
CanoScan D1250U2 |
USB |
unsupported |
Not supported. However, someone started working on this scanner and some information is available (see link). |
unsupported
(2004-04-30)
|
? |
CanoScan D2400UF |
USB |
unsupported |
Not supported. See link. |
unsupported
(2004-04-30)
|
? |
CanoScan FB310P |
Parport (ECP) |
unsupported |
Rebadged Avision, different command set |
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan FB320P |
Parport (ECP) |
basic |
Newly added support |
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan FB330P |
Parport (ECP) |
good |
|
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan FB610P |
Parport (ECP) |
unsupported |
Rebadged Avision, different command set |
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan FB620P |
Parport (ECP) |
basic |
Newly added support |
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan FB620U |
USB |
unsupported |
Probably not supported. Vendor/product 0x4a9/0x2202. Some information is available. |
unsupported
(2004-04-30)
|
? |
CanoScan FB630P |
Parport (ECP) |
good |
|
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan fb630u |
USB |
good |
OK |
canon630u
(0.1)
|
sane-canon630u |
CanoScan fb636u |
USB |
untested |
hopefully works |
canon630u
(0.1)
|
sane-canon630u |
CanoScan FB1210U |
USB |
unsupported |
Not supported. Vendor/product 0x4a9/0x2205. However, a stand-alone program for FreeBSD is available. |
unsupported
(2004-04-30)
|
? |
CanoScan LiDE20 |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
CanoScan LiDE30 |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
CanoScan N340P |
Parport (ECP) |
good |
|
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan N640P |
Parport (ECP) |
good |
|
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan N640P ex |
Parport (ECP) |
good |
Just an N640P in a different box? |
canon_pp
(0.33)
|
sane-canon_pp |
CanoScan N650U/N656U |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
CanoScan N670U/N676U |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
CanoScan N1220U |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
CanoScan N1240U |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
DR-2080C |
USB SCSI |
unsupported |
Probably not supported. Pass-trough (ADF) scanner. |
unsupported
(2004-04-30)
|
? |
DR-3020C |
SCSI |
unsupported |
Not supported. High-speed pass-trough (ADF) scanner. |
unsupported
(2004-04-30)
|
? |
DR-3060 |
SCSI |
unsupported |
Probably not supported. High-speed pass-trough (ADF) scanner. |
unsupported
(2004-04-30)
|
? |
DR-3080C |
SCSI |
unsupported |
Probably not supported. High-speed pass-trough (ADF) color scanner. |
unsupported
(2004-04-30)
|
? |
DR-6080 |
SCSI |
unsupported |
Probably not supported. High-speed pass-trough (ADF) scanner. |
unsupported
(2004-04-30)
|
? |
DR-9080C |
SCSI |
unsupported |
Probably not supported. High-speed pass-trough (ADF) color scanner. Similar to DR-6080C, but can scan in color. |
unsupported
(2004-04-30)
|
? |
FS4000 |
USB SCSI |
unsupported |
Not supported. USB Vendor/product 0x04a9/0x3042. See link for more details. |
unsupported
(2004-04-30)
|
? |
IS 12 |
USB |
unsupported |
Probably not supported. This scanner is used in a number of Canon portable printers (BJC-80 for one). No further information available. |
unsupported
(2004-04-30)
|
? |
IS 32 |
USB |
unsupported |
Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.compaq.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
S4 100 |
USB |
unsupported |
Not supported. Vendor=0x049f, Product=0x001a. |
unsupported
(2004-04-30)
|
? |
S4-100 |
USB |
complete |
Identical to UMAX 3400 |
plustek
(0.47)
|
sane-plustek |
S200 |
USB |
unsupported |
Not supported. 2400x1200 dpi. Vendor=0x049f, Product=0x0021. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00 |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.cardscan.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Cardscan 500 |
USB |
unsupported |
Probably not supported. Businesscard reader. Vendor/product: 0x08f0/0x0001. |
unsupported
(2004-04-30)
|
? |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
9352 |
Parport (EPP) |
good |
300 dpi CCD scanner |
mustek_pp
(13)
|
sane-mustek_pp |
Link(s):
http://www.blackwidow.co.uk/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
DF-600P |
SCSI |
good |
sub model VM3510 |
teco1
(1.0-10)
|
sane-teco1 |
DF-1200T+ |
SCSI |
untested |
sub model VM3530+ |
teco1
(1.0-10)
|
sane-teco1 |
DF-4830T |
SCSI |
untested |
sub model VM4542 |
teco1
(1.0-10)
|
sane-teco1 |
DF-9624 |
SCSI |
untested |
sub model VM6530+ |
teco1
(1.0-10)
|
sane-teco1 |
Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
j-6121 |
Parport |
unsupported |
Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
unsupported
(2004-04-30)
|
? |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
KTX-9600US |
SCSI |
untested |
no feedback |
umax
(1.0-41)
|
sane-umax |
Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
j-6121 |
Parport |
unsupported |
Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
unsupported
(2004-04-30)
|
? |
M-3630 A |
Parport |
unsupported |
Probably unsupported. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.epson.com/, http://www.epson.com
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Image Scanner 256 |
SCSI |
good |
OK, SCSI-ID=UMAX UG 80 |
umax
(1.0-41)
|
sane-umax |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Galleria 600 |
SCSI |
untested |
untested, SCSI-ID=ESCORT Galleria 600S |
umax
(1.0-41)
|
sane-umax |
Link(s):
http://www.fujitsu.com/, http://www.fujitsu.com/services/computing/peripheral/scanners/product/, http://www.fcpa.fujitsu.com/products/scanners/, http://www.fujitsu.ca/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
4800 |
Parport (EPP) |
good |
300 dpi CCD scanner |
mustek_pp
(13)
|
sane-mustek_pp |
Link(s):
http://www.genius-kye.com/, http://www.geniusnet.com.tw/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
2000 |
USB |
good |
Same as Artec Ultima 2000. |
gt68xx
(1.0-60)
|
sane-gt68xx |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
SCAN@HOME 48 USB |
USB |
unsupported |
Probably unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.guillemot.com
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
SCAN@HOME 48 USB |
USB |
unsupported |
Probably unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.hp.com, http://www.hp.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Photo Scanner 1000 |
USB |
unsupported |
Not supported by SANE. However, it's detected as mass storage device so just mounting it is reported to work. See link for devices data. |
unsupported
(2004-04-30)
|
? |
Photosmart 1200 Photo |
USB |
unsupported |
Probably not supported by SANE. No details known. 10x15 cm. Maybe similar to Photo Scanner 1000? |
unsupported
(2004-04-30)
|
? |
PhotoSmart PhotoScanner |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
Photosmart S20 (C5101A) |
USB |
unsupported |
Not supported yet by SANE, but a backend is under development. See link for details. |
unsupported
(2004-04-30)
|
? |
Photosmart S20xi (C7150A) |
USB |
unsupported |
Not supported yet by SANE, but a backend is under development. See link for details. |
unsupported
(2004-04-30)
|
? |
ScanJet 3c |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 3p |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 4c |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 4p |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 5p |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 5s |
Parport (EPP) |
minimal |
Requires libieee1284 library. Only gray mode. |
hpsj5s
(0.03)
|
sane-hpsj5s |
ScanJet 2100C |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
ScanJet 2200C |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
ScanJet 2300C |
USB |
unsupported |
Unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
Scanjet 3200C |
Parport (EPP/ECP) |
good |
works (relabelled 1220P and 2000P) |
umax_pp
(1)
|
sane-umax_pp |
ScanJet 3970c |
USB |
unsupported |
Unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
ScanJet 4100C |
USB |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 4600 |
USB |
unsupported |
Not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
ScanJet 4670 |
USB |
unsupported |
Not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
ScanJet 5100C |
Parport |
complete |
Requires ppscsi driver and epst module |
hp
(1.06)
|
sane-hp |
ScanJet 5200C |
Parport USB |
complete |
Parallel interface requires ppscsi driver and epst module |
hp
(1.06)
|
sane-hp |
ScanJet 5300C |
USB |
complete |
1 pass, 1200 dpi - regularly tested |
avision
(Build: 80)
|
sane-avision |
ScanJet 5370C |
USB |
basic |
1 pass, 2400 dpi |
avision
(Build: 80)
|
sane-avision |
ScanJet 5400c |
USB |
basic |
|
hp5400
(1.0-2)
|
sane-hp5400 |
ScanJet 5470c |
USB |
basic |
|
hp5400
(1.0-2)
|
sane-hp5400 |
ScanJet 5490c |
USB |
basic |
|
hp5400
(1.0-2)
|
sane-hp5400 |
ScanJet 6100C |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 6200C |
SCSI USB |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 6250C |
SCSI USB |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 6300C |
SCSI USB |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 6350C |
SCSI USB |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 6390C |
SCSI USB |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet 7400c |
USB |
good |
1 pass, 1200 dpi - dual USB/SCSI interface |
avision
(Build: 80)
|
sane-avision |
ScanJet 7450c |
USB |
good |
1 pass, 1200 dpi - dual USB/SCSI interface |
avision
(Build: 80)
|
sane-avision |
ScanJet 7490c |
USB |
good |
1 pass, 1200 dpi - dual USB/SCSI interface |
avision
(Build: 80)
|
sane-avision |
ScanJet 8200C |
USB |
unsupported |
Not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
ScanJet 8250C |
USB |
unsupported |
Not supported. SCSI optional. Includes ADF and TA. Probably similar to 8200C. No further information. |
unsupported
(2004-04-30)
|
? |
ScanJet 8290C |
USB |
unsupported |
Not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
ScanJet IIc |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet IIcx |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet IIp |
SCSI |
complete |
|
hp
(1.06)
|
sane-hp |
ScanJet Plus |
Propietary |
complete |
Driver for HP parallel interface card required |
hp
(1.06)
|
sane-hp |
Link(s):
http://www.ibm.com/, http://www.ibm.com
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
2456 |
SCSI |
basic |
Was reported to work long time ago. Reports are welcome. |
ibm
(1.0-4)
|
sane-ibm |
ADF Color Scanner |
Proprietary |
unsupported |
Unsupported. Uses proprietary ISA card. Maybe the same as the Plustek Spectra ADF? |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.komodo.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
S1200 |
SCSI |
untested |
rebadged Sceptre S1200 |
sceptre
(1.0-10)
|
sane-sceptre |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
LEOScan S3 |
SCSI |
good |
FCC ID LUZFS1130 |
leo
(1.0-10)
|
sane-leo |
Link(s):
http://www.lexmark.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
X70 |
USB |
good |
Works, some resolutions fail at 16 bit |
gt68xx
(1.0-60)
|
sane-gt68xx |
X73 |
USB |
good |
Works, some resolutions fail at 16 bit, same as X70 |
gt68xx
(1.0-60)
|
sane-gt68xx |
X74 |
USB |
unsupported |
Unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
X75 |
USB |
unsupported |
Unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
X83 |
USB |
unsupported |
Unsupported. Vendor/product 0x043d/0x003d. GL640. |
unsupported
(2004-04-30)
|
? |
X1150 |
USB |
unsupported |
Unsupported. |
unsupported
(2004-04-30)
|
? |
X5130 |
USB |
unsupported |
Unsupported. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.heidelberg.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Jade |
SCSI |
good |
OK, SCSI-ID=LinoHell JADE |
umax
(1.0-41)
|
sane-umax |
Jade |
SCSI |
good |
OK, SCSI-ID=LinoHell Office |
umax
(1.0-41)
|
sane-umax |
Jade2 |
SCSI |
good |
OK, SCSI-ID=LinoHell Office2 |
umax
(1.0-41)
|
sane-umax |
Linoscan 1400 |
SCSI |
good |
OK, SCSI-ID=HDM LS4H1S |
umax
(1.0-41)
|
sane-umax |
Opal |
SCSI |
untested |
support disabled until tested - please contact author |
umax
(1.0-41)
|
sane-umax |
Opal Ultra |
SCSI |
untested |
support disabled until tested - please contact author |
umax
(1.0-41)
|
sane-umax |
Saphir |
SCSI |
untested |
support disabled until tested - please contact author |
umax
(1.0-41)
|
sane-umax |
Saphir HiRes |
SCSI |
untested |
support disabled until tested - please contact author |
umax
(1.0-41)
|
sane-umax |
Saphir Ultra |
SCSI |
untested |
support disabled until tested - please contact author |
umax
(1.0-41)
|
sane-umax |
Saphir Ultra II |
SCSI |
good |
OK, SCSI-ID=Linotype SAPHIR4 |
umax
(1.0-41)
|
sane-umax |
Saphir2 |
SCSI |
good |
OK, SCSI-ID=LinoHell SAPHIR2 |
umax
(1.0-41)
|
sane-umax |
Saphir3 |
SCSI |
good |
OK, SCSI-ID=LinoHell SAPHIR3 |
umax
(1.0-41)
|
sane-umax |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
PageScan Color |
Parport |
unsupported |
Most probably unsupported. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.medion.com, http://www.medion.de/, http://www.medion.com/
Comment: Sold by Aldi and Tchibo.
Link(s):
http://www.artecusa.com/, http://www.memorex.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
6136u |
USB |
unsupported |
Probably unsupported. |
unsupported
(2004-04-30)
|
? |
6142u |
USB |
unsupported |
Probably unsupported. Same as Visioneer Onetouch 4400. See link for details. |
unsupported
(2004-04-30)
|
? |
MEM 48U |
USB |
good |
Different product id: 0x4005 |
artec_eplus48u
(0.0.10)
|
sane-artec_eplus48u |
Link(s):
http://www.microstar.de/
Link(s):
http://www.microtek.com/
Link(s):
http://www.minolta.com, http://www.minolta.com/
Link(s):
http://www.mitsubishi.com
Link(s):
http://www.mustek.com/, http://www.mustek.com.tw/, http://www.mustek.de/
Link(s):
http://www.nevt.co.jp/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
PC-IN500/4C |
SCSI |
good |
PC-IN500/4C was sold only in JAPAN |
nec
(0.12)
|
sane-nec |
Link(s):
http://www.nikon.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
PhotoMaker 3 |
Parport |
unsupported |
Probably not supported. |
unsupported
(2004-04-30)
|
? |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Diamond 1200 |
USB |
good |
Similar to Mustek BearPaw 1200 (Plus) |
gt68xx
(1.0-60)
|
sane-gt68xx |
Diamond 1200 Plus |
USB |
good |
Similar to Mustek BearPaw 1200 Plus |
gt68xx
(1.0-60)
|
sane-gt68xx |
Diamond 2450 |
USB |
basic |
|
gt68xx
(1.0-60)
|
sane-gt68xx |
Link(s):
http://www.panasonic.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
DSmobile USB |
USB |
unsupported |
Probably not supported. Some information is available. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.scanace.com/
Comment: Pacific Image Electronics
Link(s):
http://www.image-land.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Splendeur 3024 |
SCSI |
good |
sub model VM3552 |
teco3
(1.0-1)
|
sane-teco3 |
Link(s):
http://www.plustek.com/, http://www.plustek.de/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
OpticPro 600P/6000P |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 1212U |
USB |
basic |
|
u12
(0.02, NEW!)
|
sane-u12 |
OpticPro 1236P |
Parport (SPP, EPP) |
complete |
reported as OpticPro 12000P/96000P |
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 1248U |
USB |
good |
Works up to 600 dpi. |
gt68xx
(1.0-60)
|
sane-gt68xx |
OpticPro 2400SP |
SCSI |
untested |
sub model VM3552 |
teco3
(1.0-1)
|
sane-teco3 |
OpticPro 4800P |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 4830P |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 4831P |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 9600P |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 9630P |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 9630PL |
Parport (SPP, EPP) |
complete |
use driver-switch mov=1 |
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 9636P |
Parport (SPP, EPP) |
complete |
use driver-switch mov=4 |
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 9636P+/Turbo |
Parport (SPP, EPP) |
complete |
use driver-switch mov=3 |
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 9636T |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 12000P/96000P |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 12000T |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro 19200S |
SCSI |
complete |
rebadged Artec AM12S |
artec
(unmaintained)
|
sane-artec |
OpticPro A3U |
USB |
unsupported |
Uses Plustek ASIC P99002 |
unsupported
(2004-04-30)
|
? |
OpticPro AI3 |
Parport (SPP, EPP) |
basic |
use driver-switch mov=5, poor picture quality |
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro P8 |
Parport |
untested |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro P12 |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro PT12 |
Parport (SPP, EPP) |
complete |
|
plustek_pp
(0.01)
|
sane-plustek_pp |
OpticPro S6 |
USB |
unsupported |
Uses RealTek chipset (RTL8801D) |
unsupported
(2004-04-30)
|
? |
OpticPro U12 |
USB |
basic |
Note: Only devices with product ID 0x0001 are supported! |
u12
(0.02, NEW!)
|
sane-u12 |
OpticPro U12 |
USB |
complete |
NOTE: Devices with product ID 0x0001 are not supported! |
plustek
(0.47)
|
sane-plustek |
OpticPro U16B |
USB |
good |
Works upto 600 dpi. |
gt68xx
(1.0-60)
|
sane-gt68xx |
OpticPro U16B+ |
USB |
untested |
Probably works. Please tell me if you own such a device. |
gt68xx
(1.0-60)
|
sane-gt68xx |
OpticPro U24 |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
OpticPro UA18 |
USB |
unsupported |
Probably LM983x based. |
unsupported
(2004-04-30)
|
? |
OpticPro UT12 |
USB |
basic |
Note: Only devices with product ID 0x0001 are supported! |
u12
(0.02, NEW!)
|
sane-u12 |
OpticPro UT12 |
USB |
complete |
Note: Devices with product ID 0x0001 are not supported! |
plustek
(0.47)
|
sane-plustek |
OpticPro UT16 |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
OpticPro UT16B |
USB |
untested |
Probably works. Transparency adapter not supported yet. Please contact me if you own such a device. |
gt68xx
(1.0-60)
|
sane-gt68xx |
OpticPro UT24 |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
OpticSlim 1200 |
USB |
good |
|
gt68xx
(1.0-60)
|
sane-gt68xx |
OpticSlim 2400 |
USB |
basic |
Calibration doesn't seem to work correctly on all scanners yet. Needs more testing. Please tell me how well this scanner works. |
gt68xx
(1.0-60)
|
sane-gt68xx |
Spectra ADF |
Proprietary |
unsupported |
Unsupported. Uses proprietary ISA card that also provides power and is labelled GPS-1 PAGE-A from Taiwan. Other labels on the scanner include ADF Color Scanner and SF600AS. Maybe the same as the IBM ADF Color Scanner? |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.primax.nl/
Link(s):
http://www.fida.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Winscan Pro 2448U |
USB |
unsupported |
Not supported. Some information is available. Vendor=0x06dc product=0x0014. RealTek RTS8801. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.quato.de/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
X-Finity |
SCSI |
unsupported |
Probably not supported. No details yet. Originally manufactured by PFU? |
unsupported
(2004-04-30)
|
? |
X-Finity Ultra |
USB IEEE-1394 |
unsupported |
Probably not supported. No details yet. |
unsupported
(2004-04-30)
|
? |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
DigitDia 3600 |
USB IEEE-1394 |
unsupported |
Probably unsupported. Film scanner that can scan directly from the magazine. |
unsupported
(2004-04-30)
|
? |
iScan 1800 |
USB |
unsupported |
Probably unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
ProScan 4000 |
USB IEEE-1394 |
unsupported |
Probably unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.relisys.com/, http://www.tecoimage.com.tw/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
19200i |
USB |
good |
Similar to Plustek OpticPro 1248U |
gt68xx
(1.0-60)
|
sane-gt68xx |
RevScan Orange R48Ti |
USB |
basic |
Rebadged Plustek OpticPro UT12 |
u12
(0.02, NEW!)
|
sane-u12 |
Link(s):
http://www.ricoh.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
IS-410 |
SCSI |
untested |
Untested, please report! |
ibm
(1.0-4)
|
sane-ibm |
IS-420 |
SCSI |
basic |
Works at least in flatbed mode. |
ibm
(1.0-4)
|
sane-ibm |
IS-430 |
SCSI |
untested |
Untested, please report! |
ibm
(1.0-4)
|
sane-ibm |
Ricoh IS50 |
SCSI |
basic |
|
ricoh (unmaintained)
|
sane-ricoh |
Ricoh IS60 |
SCSI |
basic |
|
ricoh (unmaintained)
|
sane-ricoh |
Link(s):
http://www.scanport.com/
Link(s):
http://www.sceptre.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Vividscan S1200 |
SCSI |
basic |
|
sceptre
(1.0-10)
|
sane-sceptre |
Link(s):
http://sharp-world.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
DMS 2000 |
proprietary |
unsupported |
Not supported until now. Work on a backend has started, contact the author for details (see link) |
unsupported
(2004-04-30)
|
? |
SmartScan 3600 |
USB IEEE-1394 |
unsupported |
Probably not supported. Same as PIE Primefilm 2600 PRO. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.siemens.com/, http://www.siemens.de/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
9036 Flatbed scanner |
SCSI |
basic |
|
s9036 (unmaintained)
|
sane-s9036 |
S9036 |
SCSI |
untested |
gray only |
agfafocus (unmaintained)
|
sane-agfafocus |
ST400 |
SCSI |
basic |
6 bit gray |
st400
(1.6)
|
sane-st400 |
ST800 |
SCSI |
basic |
6 bit gray |
st400
(1.6)
|
sane-st400 |
Comment: Spot seems have gone out of business.
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Maxiscan A4 |
proprietary |
unsupported |
Not supported until now. Work on a backend has started, see link for more information. |
unsupported
(2004-04-30)
|
? |
ScanTak 2c |
proprietary |
unsupported |
Not supported. Work on a backend has started, see link for more information. |
unsupported
(2004-04-30)
|
? |
ScanTak 3c |
proprietary |
unsupported |
Not supported. Work on a backend has started, see link for more information. |
unsupported
(2004-04-30)
|
? |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
TravelScan 460/464 |
USB |
unsupported |
Not supported. Some information is available. May work with the Plustek backend in future. |
unsupported
(2004-04-30)
|
? |
TravelScan Pro |
USB |
unsupported |
Probably not supported. Some information is available. |
unsupported
(2004-04-30)
|
? |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Artiscan 6000C |
SCSI |
good |
3 pass, 300 DPI |
tamarack (unmaintained)
|
sane-tamarack |
Artiscan 8000C |
SCSI |
good |
3 pass, 400 DPI |
tamarack (unmaintained)
|
sane-tamarack |
Artiscan 9600 pro 36 |
Parport |
unsupported |
Unsupported. Someone wants to write a backend. See link. |
unsupported
(2004-04-30)
|
? |
Artiscan 12000C |
SCSI |
good |
3 pass, 600 DPI |
tamarack (unmaintained)
|
sane-tamarack |
Link(s):
http://www.tce.com.br/
Comment: Brasilian vendor.
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
MK600U |
USB |
unsupported |
Not supported. Some information is available. |
unsupported
(2004-04-30)
|
? |
S450 |
Parport |
unsupported |
Not supported by SANE but is reported to work with pxscan (see link). |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.tecoimage.com.tw/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
VM6509F |
USB |
unsupported |
Probably unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.nikon.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
PowerScanII |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Link(s):
http://www.trust-site.com, http://www.trust-site.com/home/
Comment: Carefully check the model names. Trust uses similar names for completely different hardware.
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
CombiScan 19200 |
Parport USB |
unsupported |
Unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
Compact Scan USB 19200 |
USB |
complete |
Mustek 1200 UB compatible |
mustek_usb
(1.0-17)
|
sane-mustek_usb |
Compact Scan USB 19200 |
USB |
good |
Works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus) |
gt68xx
(1.0-60)
|
sane-gt68xx |
Easy Connect 9600+ |
Parport (EPP) |
good |
300x600 dpi CIS scanner |
mustek_pp
(13)
|
sane-mustek_pp |
Easy Connect 19200+ |
Parport (EPP) |
good |
300x600 dpi CIS scanner |
mustek_pp
(13)
|
sane-mustek_pp |
Easy Webscan 19200 |
USB |
good |
Different product id: 0x4006 |
artec_eplus48u
(0.0.10)
|
sane-artec_eplus48u |
Flat Scan USB 19200 |
USB |
good |
Similar to Artec Ultima 2000 |
gt68xx
(1.0-60)
|
sane-gt68xx |
Imagery 1200 |
SCSI |
good |
3-pass, Mustek Paragon MFS-6000CX compatible |
mustek
(1.0-136)
|
sane-mustek |
Imagery 1200 SP |
SCSI |
complete |
Mustek Paragon MFS-6000SP compatible |
mustek
(1.0-136)
|
sane-mustek |
Imagery 2400 SP |
SCSI |
good |
sub model VM3552 |
teco3
(1.0-1)
|
sane-teco3 |
Imagery 4800 SP |
SCSI |
complete |
Mustek Paragon 600 II CD compatible |
mustek
(1.0-136)
|
sane-mustek |
Imagery 4800 SP+ |
SCSI |
good |
sub model VM3552 |
teco3
(1.0-1)
|
sane-teco3 |
Imagery 9600 SP |
SCSI |
untested |
sub model VM3552 |
teco3
(1.0-1)
|
sane-teco3 |
SCSI Connect 19200 |
SCSI |
complete |
Mustek ScanExpress 12000SP compatible |
mustek
(1.0-136)
|
sane-mustek |
SCSI excellence series 19200 |
SCSI |
complete |
Mustek ScanExpress 12000SP compatible |
mustek
(1.0-136)
|
sane-mustek |
Link(s):
http://www.umax.com/, http://www.umax.com.tw/, http://www.umax.de/en, http://www.umax-europe.com, http://www.umaxjapan.co.jp, http://www.umax.com.cn
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Astra 600P |
Parport (sPP/ECP) |
unsupported |
untested, but should be close to 610P |
umax_pp
(1)
|
sane-umax_pp |
Astra 600S |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Astra 610P |
Parport (SPP/ECP) |
minimal |
work in progress |
umax_pp
(1)
|
sane-umax_pp |
Astra 610S |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Astra 1200S |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Astra 1220P |
Parport (EPP/ECP) |
good |
|
umax_pp
(1)
|
sane-umax_pp |
Astra 1220S |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Astra 1220U |
USB |
good |
OK |
umax1220u
(1.0.1)
|
sane-umax1220u |
Astra 1600P |
Parport (EPP) |
good |
|
umax_pp
(1)
|
sane-umax_pp |
Astra 1600U |
USB |
minimal |
Is reported to be the same as the 2000U. Sort of scans, but colors all messed up. |
umax1220u
(1.0.1)
|
sane-umax1220u |
Astra 2000P |
Parport (EPP/ECP) |
good |
|
umax_pp
(1)
|
sane-umax_pp |
Astra 2000U |
USB |
minimal |
Sort of scans, but colors all messed up. |
umax1220u
(1.0.1)
|
sane-umax1220u |
Astra 2100 U |
USB |
unsupported |
Probably not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
Astra 2100S |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Astra 2200 (SU) |
USB |
good |
OK, needs USB control messages |
umax
(1.0-41)
|
sane-umax |
Astra 2200 (SU) |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Astra 2400S |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Astra 3000 |
USB |
unsupported |
Probably not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
Astra 3600 |
USB |
unsupported |
Probably not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
Astra 4000 |
USB |
unsupported |
Probably not supported, no details known. |
unsupported
(2004-04-30)
|
? |
Astra 4400 |
USB |
unsupported |
Probably not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
Astra 4450 |
USB |
unsupported |
Probably not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
Astra 4600 |
USB |
unsupported |
Probably not supported, no details known. |
unsupported
(2004-04-30)
|
? |
Astra 6400 |
IEEE-1394 |
unsupported |
will propably work one day |
umax
(1.0-41)
|
sane-umax |
Astra 6450 |
IEEE-1394 |
unsupported |
will propably work one day |
umax
(1.0-41)
|
sane-umax |
Astra 6700 |
USB |
unsupported |
Not supported. No chipset information available. Same as Avision iVina FB2400. |
unsupported
(2004-04-30)
|
? |
Astra MX3 |
USB |
good |
OK, needs USB control messages |
umax
(1.0-41)
|
sane-umax |
Astra MX3 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
AstraSlim |
USB |
unsupported |
Probably not supported currently. See link for more details. |
unsupported
(2004-04-30)
|
? |
AstraSlim 1200 SE |
USB |
unsupported |
Probably not supported currently. May be supported in future. See link for more details. |
unsupported
(2004-04-30)
|
? |
AstraSlim SE |
USB |
good |
Different product id: 0x4009 |
artec_eplus48u
(0.0.10)
|
sane-artec_eplus48u |
Gemini D-16 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Mirage D-16L |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Mirage II |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Mirage IIse |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
PL-II |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
PowerLook |
SCSI |
good |
OK, SCSI-ID=PS-2400X |
umax
(1.0-41)
|
sane-umax |
PowerLook 270 |
SCSI |
unsupported |
incompatible |
umax
(1.0-41)
|
sane-umax |
PowerLook 270plus |
SCSI |
unsupported |
incompatible |
umax
(1.0-41)
|
sane-umax |
Powerlook 1000 USB |
USB |
unsupported |
Probably not supported. No further information available. |
unsupported
(2004-04-30)
|
? |
PowerLook 1100 |
IEEE-1394 |
unsupported |
will propably work one day |
umax
(1.0-41)
|
sane-umax |
PowerLook 2000 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
PowerLook 2100XL |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
PowerLook 3000 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
PowerLook III |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
PSD |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Supervista S-12 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
UC 630 |
SCSI |
good |
Version 2.8 OK, others only lineart OK |
umax
(1.0-41)
|
sane-umax |
UC 840 |
SCSI |
good |
Version 1.6 OK, others only lineart OK |
umax
(1.0-41)
|
sane-umax |
UC 1200S |
SCSI |
untested |
may work, please test and give feedback |
umax
(1.0-41)
|
sane-umax |
UC 1200SE |
SCSI |
good |
Version 3.0 OK, others unknown |
umax
(1.0-41)
|
sane-umax |
UC 1260 |
SCSI |
good |
Version 1.6 OK, others unknown |
umax
(1.0-41)
|
sane-umax |
UG 80 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
UG 630 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
UMAX 3400 |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
UMAX 3450 |
USB |
good |
TPA not supported |
plustek
(0.47)
|
sane-plustek |
UMAX 5400 |
USB |
complete |
|
plustek
(0.47)
|
sane-plustek |
UMAX S-6E |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
UMAX S-6EG |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
UMAX S-12 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
UMAX S-12G |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
UMAX VT600 |
SCSI |
untested |
may work, please test and give feedback |
umax
(1.0-41)
|
sane-umax |
Vista S6 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Vista S6E |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Vista-S8 |
SCSI |
good |
OK |
umax
(1.0-41)
|
sane-umax |
Vista-T630 |
SCSI |
good |
OK for some firmwareversions, on others only lineart OK |
umax
(1.0-41)
|
sane-umax |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
3000 |
USB |
unsupported |
Not supported. See link for more details. |
unsupported
(2004-04-30)
|
? |
Link(s):
http://www.visioneer.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
6200 |
USB |
unsupported |
Not supported. Is reported to use the E5 chipset. Uses a Primax ID. See link for some details. Looks similar to Primascan Colorado 2600u. |
unsupported
(2004-04-30)
|
? |
Onetouch 4400 |
USB |
unsupported |
Not supported. E5 chipset? Vendor/product 0x0461/0x0347.See link for more details. |
unsupported
(2004-04-30)
|
? |
OneTouch 4800 USB |
USB |
unsupported |
Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details. |
unsupported
(2004-04-30)
|
? |
OneTouch 5300 USB |
USB |
unsupported |
Not supported. Vendor/product ids 0x04a7/0x0226. Chipset is RTS8801B(?). See link for output of /proc/bus/usb/devices. |
unsupported
(2004-04-30)
|
? |
OneTouch 5800 USB |
USB |
unsupported |
Unsupported. 48 bit scanner, doesn't work with viceo backend. RTS8801C. Vendor/product 0x04a7/0x0226. |
unsupported
(2004-04-30)
|
? |
OneTouch 7300 |
USB |
untested |
Should be detected but may not work. Please tell me if you own such a device. |
gt68xx
(1.0-60)
|
sane-gt68xx |
OneTouch 8100 |
USB |
unsupported |
Unsupported. See link for details. |
unsupported
(2004-04-30)
|
? |
Onetouch 8700 |
USB |
unsupported |
Not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
Onetouch 8900 |
USB |
unsupported |
Not supported. Same as 8920 but without TA? |
unsupported
(2004-04-30)
|
? |
Onetouch 8920 |
USB |
unsupported |
Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. Chipset is RTS8801C. See link for output of /proc/bus/usb/devices. |
unsupported
(2004-04-30)
|
? |
Onetouch 9020 |
USB |
unsupported |
Not supported. Vendor/product: 0x04a7/0x022c. |
unsupported
(2004-04-30)
|
? |
Onetouch Pro 8820 |
USB |
unsupported |
Probably not supported. See link for details. |
unsupported
(2004-04-30)
|
? |
PaperPort 3100b |
Parport |
unsupported |
Most probably not supported. More details would be appreciated. |
unsupported
(2004-04-30)
|
? |
PaperPort 6100 |
Parport |
unsupported |
Most probably not supported. More details would be appreciated. |
unsupported
(2004-04-30)
|
? |
Primascan Colorado 2600u |
USB |
unsupported |
Not supported. See Visioneer Onetouch 4400. |
unsupported
(2004-04-30)
|
? |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Compact II |
Parport (EPP) |
good |
300 dpi CCD scanner |
mustek_pp
(13)
|
sane-mustek_pp |
Link(s):
http://www.vobis.de/
Comment: Company was renamed to Benq.
Link(s):
http://www.xerox.com/
Manufacturers:
Kodak,
Polaroid
Link(s):
http://www.kodak.com/global/en/service/digCam/dc25/dc25.shtml, http://www.kodak.com/global/en/service/digCam/dc210/dc210.shtml, http://www.kodak.com/global/en/service/products/ekn006568.jhtml
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
DC20 |
Serial port |
basic |
DC-20 untested by author but reported to work |
dc25
(1.2)
|
sane-dc25 |
DC25 |
Serial port |
complete |
|
dc25
(1.2)
|
sane-dc25 |
DC210 |
Serial port |
basic |
|
dc210
(0.0)
|
sane-dc210 |
DC240 |
Serial port |
good |
Use gphoto2 backend to get USB support |
dc240
(0.0)
|
sane-dc240 |
Link(s):
http://www.polaroid.com/
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
DMC |
SCSI |
good |
|
dmc (unmaintained)
|
sane-dmc |
Manufacturers:
Biolux,
Connectix
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
654 (micrOcular) |
USB |
unsupported |
Not supported yet. See link for more details. |
unsupported
(2004-04-30)
|
? |
Model |
Interface |
Status |
Comment |
Backend |
Manpage |
Color QuickCam |
Parport |
good |
Requires root privileges. |
qcam (unmaintained)
|
sane-qcam |
Greyscale QuickCam |
Parport |
minimal |
Requires root privileges. Partly working. |
qcam (unmaintained)
|
sane-qcam |
Backends:
gphoto2,
pint,
pnm,
test,
v4l
Link(s):
mailto:peter@fales-lorenz.net
Manual page: sane-gphoto2
Description: Multiple cameras supported by the gphoto2 libraries
Comment: The long-term plan is to support all the cameras supported by the gphoto2 libraries (currently over 140 models). However, at this stage, only a handful of cameras are definitely known to work with SANE. Other cameras will probably work if the native file format is EXIF or JPEG. Testers welcome!
Manual page: sane-pint
Description: Scanners with the machine-independent PINT interface
Comment: Haven't been tested for a long time. Handle with care.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-pnm
Description: Reads PNM files
Comment: Used for debugging frontends. Obsolete, use test backend instead.
Link(s):
http://www.meier-geinitz.de/sane/test-backend/
Manual page: sane-test
Description: Frontend-tester
Comment: Backend for testing frontends. Also serves as example for SANE backend options.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-v4l
Description: Interface to Video For Linux API
Comment: Supports video cameras and other devices accessed by the v4l kernel API, e.g. bttv devices. Quite a lot of known bugs.
Backends:
dll,
net
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-dll
Description: Dynamic loading of shared-library backends.
Link(s):
http://www.penguin-breeder.org/?page=sane-net
Manual page: sane-net
Description: Network access to saned servers
Comment: Can be used to access any scanner supported by SANE over the net. Supports IPv4 and IPv6.
- Model:
- Name of the the device.
- Interface:
- How the device is connected to the computer.
- Status:
- Indicates how many of the features the device provides
are supported by SANE.
- unsupported means the device is not supported at least by this backend. It may be supported by other backends, however.
- untested means the device may be supported but couldn't be tested. Be very careful and report success/failure.
- minimal means that the
device is detected and scans at least in one mode. But the quality
is bad or important features won't work.
- basic means it works at
least in the most important modes but quality is not perfect.
- good means the device is usable
for day-to-day work. Some rather exotic features may be missing.
- complete means the backends
supports everything the device can do.
- Comment:
- More information about the backend or model, e.g. the level of support and possible problems.
- Backend:
- Name of the backend, in parentheses if available:
Version of backend/driver; newer versions may be
available from their home sites.
NEW! means brand-new to the
current release of SANE.
UNMAINTAINED means that nobody maintains that backend. Expect no
new features or newly supported devices. You are welcome to take over
maintainership.
- Manual Page:
- A link to the man-page online, if it exists.
- Manufacturer:
- Manufacturer, vendor or brand name of the device.
- Description:
- The scope of application of the backend.
SANE homepage
Contact
This page was last updated on Sun Nov 21 21:20:56 2004
|